HOW DOES IT WORK

C-thru's Shower Shield creates a highly effective invisible barrier that prevents water spots and stains from bonding to your glass shower, tiles, windows and other hard surfaces.

Shower Shield restricts the build up of other problems such as soap scum, salt­water spots, road film, rust marks and other organic stains.

Shower Shield also contains special inhibitors to prevent mould and bacteria growth

THE GENUINE "2 MINUTE TASK!

It should take you no more than 2 minutes to apply a coat of Shower Shield to the inside of a typical clean glass shower.

To apply, put a small amount of Shower Shield onto a clean dry cloth and apply sparingly by wiping over the surface. Allow to dry and your shower or other surface is ready for use. No polishing or buffing required.

Undertake normal (say weekly) cleaning with a spray-n-wipe or detergent cleaner. After cleaning, ensure surface is dry then reapply Shower Shield as outlined above.

Every 2-3 months give a quick clean with C-thru Water Spot Remover to eliminate any contamination build-up & re­coat with Shower Shield.

CAUTION: Do not use on moulded shower linings or inserts, acrylics, Perspex, seratone, varnished or other coated surfaces. If unsure of suitability, seek advise from your shower manufacturer or test on an inconspicuous area first.