Our Products
(Click on each product for more info)
WATER SPOT REMOVER
Safely removes a wide range of difficult spots and stains from glass and virtually any hard surface. |
SHOWER SHIELD
Prevents water spots, stains, soap scum and residues from bonding to glass and other hard surfaces. |
SCRATCH-PROOF APPLICATION PADS
These pads are the perfect applicator for our Water Spot Remover, and for other cleaning where tough love is required. |
Shower Shield
Prevents water spots and stains, soap scum and other residue from bonding to:
Keeps surfaces clean longer! Makes cleaning easier!
Made In New Zealand! Guaranteed to work!
Prevents water spots and stains, soap scum and other residue from bonding to:
- Shower Glass
- Shower linings (tiles, acrylic, fibreglass, etc)
- Glass windows on vehicles, buildings / homes, boats, and other equipment
- Glass balustrades
- Stainless steel railngs, balustrades, sinks and other fixtures
- Ceramic and porcealin tiles, sinks and bathroom fixtures
- Chrome tapware and fittings
- Other hard surfaces
Keeps surfaces clean longer! Makes cleaning easier!
Made In New Zealand! Guaranteed to work!
Product Options
Domestic Use
Features:
|
Commerical Use
Available in: 2 litre, 5 litre, 20 litre and 200 litre drums.Used by:
|
How To Use C-thru Water Spot Remover (Instructions)
It should take you only about 2 minutes to apply a coat of Shower Shield to the inside on a typical clean glass shower.
To apply, put a small amount of Shower Shield onto a clean dry cloth and apply sparingly by wiping over the surface in a back-and-forth direction. Allow to dry and your shower or other surface is ready for use. No polishing or buffing required.
If this is the first time you’ve ever applied Shower Shield we recommend you apply a second coat by wiping over the surface in an up-and-down direction to make sure you cover any spots you may have missed in the first application.
Undertake normal cleaning with a mild detergent or glass safe spray-on-rinse-off type cleaner. Every few weeks, after cleaning, ensure surface is dry then reapply Shower Shield.
Every 2-3 months give a quick clean with C-thru Water Spot Remover to eliminate any contamination build-up and re-apply Shower Shield.
To apply, put a small amount of Shower Shield onto a clean dry cloth and apply sparingly by wiping over the surface in a back-and-forth direction. Allow to dry and your shower or other surface is ready for use. No polishing or buffing required.
If this is the first time you’ve ever applied Shower Shield we recommend you apply a second coat by wiping over the surface in an up-and-down direction to make sure you cover any spots you may have missed in the first application.
Undertake normal cleaning with a mild detergent or glass safe spray-on-rinse-off type cleaner. Every few weeks, after cleaning, ensure surface is dry then reapply Shower Shield.
Every 2-3 months give a quick clean with C-thru Water Spot Remover to eliminate any contamination build-up and re-apply Shower Shield.
The C-Thru Guarantee
C-thru Solutions has many thousands of satisfied customers. If any product does not perform to your satisfaction please visit Frequently Asked Questions for helpful advice. If you can’t find the answer to your question Contact Us.
If we cannot resolve your concern, return the product with proof-of-purchase to your retailer for a full refund.
If we cannot resolve your concern, return the product with proof-of-purchase to your retailer for a full refund.
View our Material Safety Data Sheet for Shower Shield...
| c-thru_shower_shield_sds_v3_with_logo.pdf |